Expert Answers about RV TV Mount parts

Expert Answers about RV TV Mount

Recommended Adapter for TV With 200x200 VESA Mounting Pattern
To be able to mount your TV to your MORryde Portable Wall RV TV Mount w/ 2 Docking Stations # MR54RR you'll just need the VESA Adapter Plates for MORryde RV TV Mounts # MR64RR.
view full answer...

Recommended Swivel T.V. Mount That Gives Access To Storage Located Behind T.V.
Sure thing! It sounds like what you're looking for is the: -MORryde Wall RV TV Mount # MR57RR. This R.V. T.V. mount has a drop down swivel design that will allow you to lift and move your T.V. out of the way to access storage that is behind it. This mount also includes the needed hardware for installation and has a 20-lbs weight capacity.
view full answer...

Recommended 55" Smart TV For RV That Can Be Mounted Outside
You sure can! Similar to the Jensen LED RV Smart TV # ASA98VR you're interested in, we have the: -Jensen LED 110V RV TV # JE5515. This TV has all the same features as # ASA98VR however it does have the much larger 55" screen you're interested in. As far as the capability to be mounted outside your RV, you can absolutely do that. All you'd need to do is make sure it is connected to a good 110V power source, just like you would if it were inside your RV.
view full answer...

Does the Jensen LED 110V RV TV Include Mounting Bracket or TV Stand
The Jensen LED 110V RV TV # JE2417, does not include a wall mounting bracket or TV stand but simply comes with the wall mounting holes on the back of the TV. These are the VESA standard pattern of 75 mm by 75 mm measuring horizontally center on center and then vertically center on center. On the back of the TV there are mounting holes that measure from center to center 2.952 inches square. If you need a wall mount, I recommend # MAF50 which is a confirmed fit. As for moving the TV from...
view full answer...

Recommended TV Mount for a 32" TV
I recommend checking out the MORryde Wall RV TV Mount # MR73ZR. This mount can support up to 35 lbs, swings 180 degrees where arm attaches to wall mount, swivels 350 degrees with pivoting elbow and mounting plate, and is made in the USA.
view full answer...

Replace RV TV With Jensen LED RV TV 24 Screen
The Jensen LED RV TV 24" Screen Item # JE2417 is a great choice to replace your current and provide the ability to stream. This TV has the VESA mounting pattern of 100 mm x 100 mm. From specs available to me it appears your Toshiba 26AV502RZ may have the 100 mm x 200 mm pattern, please verify the pattern arrangement you have. There are adaptor plates easily available as this need is not uncommon, we have the MORryde VESA Adapter Plate available, # MR74RR.
view full answer...

Plug TV Into 30 Amp RV Power Hook Up Station
The Mighty Cord RV Power Cord Adapter Plug # A10-3015AVP, will enable you to plug your TV directly into a 30 amp RV power hook up station.
view full answer...

RCA Cable For Connecting TV In RV To Jensen AWM965 Stereo System
You will need the RCA Cable # 324-000028 to connect your Jensen AWM965 to your TV in your RV camper. This cable is 20' long and connects to the rear of your Jensen stereo. The 3.5mm to RCA adapter that comes in the Service Pack # JE54FR is for connecting to a video game system or other input into the stereo auxiliary input on the front of the stereo.
view full answer...

Replacement Remote For A Jensen JTV3217 LED TV
For your Jensen LED RV TV # JTV1917DVDC, you can use the Replacement Remote Control for Jensen TVs # PXXRCASA as this remote will work on any Jensen flat screen T.V.
view full answer...

Can You Get A Remote Control For The Furrion Electric Fire Place.
You can use the Furrion Unismart Remote Control # FR34FR to control your Furrion RV Electric Fireplace with Crystals - 30" Wide - Recessed Mount - Black # FF30SC15ABL. You can use this remote to control multiple Furrion applications like TVs, Stereos, DVD players and Fireplaces.
view full answer...

Recommended TV and Wall Mount for Forest River Salem 29VBUD
As far as TVs that operate off of a 12v power source, the Jensen # JTV4015DC is a great choice for a larger TV. If the outlets inside your camper for electronics operate of 110v electricity because of a converter, you'll need to use the AC/DC Adapter # ACDC3212 for this unit or use the # JE4015 which is the 110v compatible version. If you're looking for a smaller TV for a bedroom, the Jensen # JTV2815DC has a 28" screen and would be a great choice. This unit also runs off of 12v power;...
view full answer...

LED TV for Outdoor Compartment on Forest River Georgetown Motorhome
I contacted Forest River for specs on the outside TV supplied in your 2013 Georgetown 378XL and they were able to confirm the coach was supplied with an AC-powered unit like our 24-inch Jensen LED model # JE2417. For a mount you can use part # MAF50.
view full answer...

Parts Needed for Generator and Shore Power Options for Shop Trailer
Thank you for all of the information! Trailers usually use 12V DC power but since it sounds like everything you have will operate using 110/120 AC power I recommend just going with AC power. The first thing you need is a transfer switch so your electrical system knows where to pull power from (your generator or your shore power) and for this I recommend the Progressive Dynamics Transfer Switch # PD5110010Q. Since you have a variety of electrical components I also recommend using the Progressive...
view full answer...

Recommended Budget Friendly TPMS System for Single Axle Trailer
I may have a solution for you, but you won't be able to pair sensors to a # TST-507-D-C without the transmitter that comes with a complete system like the TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors # TST-507-RV-4-C. However, you can use the PressurePro FX 2 TPMS for RVs and Trailers - Smartphone Display - 2 Waterproof Sensors # 372FX2K and it will connect directly to your smartphone to give you the ability to monitor 2 tires. This would be my recommended solution that...
view full answer...

Cell Phone Signal Booster Option For A 2015 Lance 1575 Travel Trailer
I took a look at the SureCall Flare 3.0 In-Home Cell Phone Signal Booster with Directional Antenna # SC63MR that you mentioned, and while it may easily replace your King over the air HD antenna on your 2015 Lance 1575 TT, you will not receive optimized performance due to your limited space. This antenna works best the farther it is placed from the booster, with a minimum of 25' required. With your trailer being under 20' in total length, you can expect this booster to not work as well...
view full answer...

Remote Needed For Furrion Fireplace
If you're referring to a Furrion fireplace, like the Furrion RV Electric Fireplace with Logs # F30SW15ABL, we do not carry remotes for those fireplaces, however I do have a solution. You're going to want to refer to your Furrion fireplace manual for operation, but you would be able to use the Furrion Unismart Remote Control # FR34FR to operate your fireplace. Simply press the "Fireplace/TV" button at the top of the remote, then, you should be able to control the fireplace using the bottom...
view full answer...

Adapter to Connect Fifth Wheel Trailer to Generator
We have exactly what you need for much, much less than the dealer wants to charge you. It actually sounds like the dealer wants to install an on-board generator, considering the cost you mentioned. You only need a generator adapter for your trailer that will connect to your RV. The correct one will depend on the plug you have on your 2019 Cedar Creek Silverback. The Mighty Cord Generator Adapter for RV Power Cord - 50 Amp Female to 30 Amp Twist Lock Male # A10-G30350VP has a female end...
view full answer...

Recommended RV Fireplace for Cabinet Opening 36-1/2 Inches Wide by 21-1/4 Inches Tall
The Greystone 36" Electric Fireplace # 324-000081 is designed to fit into 34-1/4" wide x 16-1/2" tall x 5-1/2" deep openings, so it's a bit smaller than the opening, but it's going to be the closest possible fit for your opening. You'll likely need to add some strips around the edges of the cabinets to close the gap, but a larger fireplace would be too big for the space you've got.
view full answer...

What Do I Need To Install The Go Power Industrial Pure Since Wave Inverter
Yes, you will need the Installation Kit for Go Power Inverters - 300 Amp Fuse - 12V and 24V, part # 342GPDCKIT4, to complete the installation of your Go Power Industrial Pure Sine Wave Inverter - GFCI - 2,000 Watt - 12V, part # 34278156. I have included product description links and video demo links below.
view full answer...

What Inverter is Required for a Small Dorm Style Refrigerator
I have a solution for you, but the Go Power Heavy-Duty Modified Sine Wave Inverter - 1,000 Watts - 12V # 34280176 isn't what I would recommend for use with a refrigerator because it may potentially damage the unit. I also would go with a slightly higher rated inverter to make sure that enough power is available. Instead I recommend using a Pure Sine Wave inverter like the Go Power Industrial Pure Sine Wave Inverter - GFCI - 1,500 Watt - 12V # 34279950, which will be well rated to use...
view full answer...

Go To Results